Tokyo Electronic CS3910H Operation Manual Download Page 3

2

Q

Handling Precautions 

DANGER 

Unplug 

If any overheating sign is observed discontinue the use immediately. 

In the event that smoke, smell, or any other overheating sign is observed, turn its 
power switch OFF immediately, and remove your plug from outlet. Do NOT try 
to continue to use this device. To do so in spite of clear signs of malfunction 
invites a fire, an electric shock hazard, or a serious damage. In such case, contact 
us or our dealer /distributor from which you purchased this device for repair 
service. 

Unplug 

If any malfunctioning sign is observed discontinue the use immediately. 

Do NOT try to use this device when it is obviously malfunctioning. (Example: 
No images on the monitor) In the event of malfunction, turn its power switch 
OFF immediately, and remove the plug from the outlet. In such case, contact us 
or our dealer/distributor from which you purchased this device for repair service. 

Unplug 

If any liquid gets into the device discontinue the use immediately. 

In the event that water, or any other type of liquid gets into the body, do NOT try 
to continue to use the device. To do so invites a fire or an electric shock hazard. In 
that case, turn its power switch OFF immediately, and then remove the plug from 
the outlet. After that, contact us or our dealer/distributor from which you 
purchased this device for repair service/technical advice. 

Unplug 

If any foreign object gets into the body, discontinue the use immediately. 

In the event that grits, small particles, or any other foreign objects get inside, do 
NOT try to continue to use the device. To do so invites a fire or an electric shock 
hazard. In that case, turn its power switch OFF immediately, and then remove the 
plug from the outlet. After that, contact us or our dealer/distributor from which 
you purchased this device. for repair service/technical advice. 

Unplug 

If any outer strong impact is given to this device discontinue the use immediately. 
In the event that this device is dropped onto the ground, or its cabinet is damaged, 
turn its power switch OFF immediately, and remove the plug from the outlet. Do 
NOT try to continue to use the device. To do so invites a fire or an electric shock 
hazard. In such case, contact us or our dealer/distributor from which you 
purchased this device for repair service. 

NEVER 

pull apart 

Do NOT disassemble this device. 
Do NOT attempt to pull apart, repair, or modify the device on your own. To do so 
might lead to a fire or an electric shock accident. Contact us or the 
dealer/distributor from which you purchased the device for repair/modification. 
 

;

Avoid 

Do NOT supply any power other than specified. 
This device is designed to work only under specified voltage. Do NOT attempt to 
supply the device with power other than specified. Supplying the device with 
unspecified power invites a fire or an electric shock hazard.

 

;

Avoid

 

Do NOT place the device unstably. 
Do NOT place the device on an unstable table, sloped ground, etc. Make sure 
that the device do not fall nor roll over to prevent an accident. 

Summary of Contents for CS3910H























Reviews: