toko TMW1003, User Manual

Page: 23 / 56

555004.doc
23
Configuring the Access Point Using KickStart
3.4.4 Device data
The columns in the ‘Select Wireless Ethernet Device ‘ dialog contain the
properties of all detected wireless devices.
Table 3-2 explains the device
data in these columns (see also Appendix A: ‘TCP and IP
settings’ on page 45 ):
3.4.5 Change IP settings
In the ‘Change IP Settings’ dialog you can select to either use dynamic
or static IP settings. (see appendix
A: ‘TCP and IP settings’ on page 45 ).
Select Dynamic IP settings when you install the Access Point in a
network with a DHCP server or Auto IP.
Table 3-2 Description of the device data in the ‘Select Wireless Device
Ethernet’ dialog
Column Description
Name The name of the Access Point. This is identical to
the SSID.
MAC address Every Ethernet device has a unique address that
is permanently linked to that device. It cannot be
changed.
See section A.2.6: ‘MAC address’ on page 48 .
IP address In order to access a TCP/IP network, a device
must have an IP address in addition to its MAC
address.
See Appendix A: ‘TCP and IP
settings’ on page 45 .
SSID The SSID is also known as Service Set ID. This is
the name of your wireless network.
See section B.4: ‘Service Set ID
(SSID)’ on page 52 .
Location The location of the Access Point.
See section 3.6.9: ‘Identity’ on page 31 on how to
edit this field.
Contact The name of the contact person for the Access
Point.
See section 3.6.9: ‘Identity’ on page 31 on how to
edit this field.