40
version 1.0
Regulatory notes and statements
FCC Radio Frequency Exposure statement
6.4
FCC Radio Frequency Exposure statement
This Wireless LAN radio device has been evaluated under FCC Bulletin
OET 65C and found compliant to the requirements as set forth in CFR
47 Sections 2.1091, 2.1093, and 15.247 (b) (4) addressing RF Exposure
from radio frequency devices. The radiated output power of this Wireless
LAN device is far below the FCC radio frequency exposure limits.
Nevertheless, this device shall be used in such a manner that the
potential for human contact during normal operation is minimized. When
using this device, a certain separation distance between antenna and
nearby persons has to be kept to ensure RF exposure compliance. In
order to comply with RF exposure limits established in the ANSI C95.1
standards, the distance between the antennas and the user should not
be less than 30 cm (12 inches).
6.5
FCC Interference Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy. If not installed and used in accordance with the instructions, it
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try and correct the interference by one or more
of the following measures:
1.
Reorient or relocate the receiving antenna.
2.
Increase the distance between the equipment and the receiver.
3.
Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
4.
Consult the dealer or an experienced radio/TV technician for help.
6.6
Export restrictions
This product or software contains encryption code which may not be
exported or transferred from the US or Canada without an approved US
Department of Commerce export license.
Summary of Contents for TMW1003
