TOKIT Omni Cook Operation Manual Download Page 24

22

Do not fill the mixing bowl with food materials with a volume larger than the 
mixing bowl's maximum allowable filling amount (the 2.2L maximum level mark).
To avoid the splashing of oil, grease, or liquid, do not remove the measuring 
cup when the device is running at high speed.
Do not force to open the mixing bowl lid or the lock-up mechanism.
Open the mixing bowl lid only when the mixing speed is zero and the lock-up 
mechanism is unlocked.

In use

The whisk is not suitable for prolonged stewing (braising, simmering, and 
fermentation), especially not for high temperature stewing.
The mixing blade set has sharp edges and must be handled with care to 
avoid injury!
Do not tough moving parts, which could cause mechanical injury.
To guard against damage and injury, do not put your hand into the mixing 
bowl when the device is connected to the power.
Do not put your hand or any tools into the mixing bowl during its operation, 
or serious personal injury or damage to the product may be caused.
Keep all body parts and hair away from the mixing blade set.
Never use the scraper in the mixing bowl before the device has fully stopped.
Make sure there is enough water in the mixing bowl during steam cooking. 
Supplement water if you want to extend the duration of steam cooking.
The hot steam generated during steam cooking could cause scalding. Keep 
your face and body away from it.
Do not touch the measuring cup during use or immediately after use of the 
device. To guard against scalding, keep the device away from infants and minors.
Do not move or rock the device during its operation.
It is strictly prohibited to cover the top of the product with other articles since 
this may prevent the release of steam.
To guard against scalding, the temperature of water added to the device 
under stirring should preferably be lower than 60 

°

C.

When the temperature of the liquid is too high, the device will automatically 
slow down its mixing speed.
Please ensure that the mixing bowl lid and the mixing bowl are properly 
locked before starting up the device.
Never leave the device unattended during its operation.
Please ensure that the device has completely stopped before opening the 
mixing bowl lid.
To guard against scalding, do not touch the mixing bowl when the device is 
used for heating food.
Do not insert the power plug before all preliminary work has been properly 
finished.
Do not use the device before mounting the accessories/mixing blade set.
Do not let the device work without food materials.
Be careful if hot liquid is poured into the mixing bowl as it can be ejected out 
due to sudden steaming.

Summary of Contents for Omni Cook



























Reviews: