TOKIT Omni Cook Operation Manual Download Page 19

17

For your better cooking experience with the Omni Cook, you can access your smart guided recipes 
by clicking the Recipe menu in the upper left corner of the screen or by performing the recipe 
search by clicking the Search bar in the upper right corner of the screen and entering key words.

Before your first use of the product, please completely clean and rinse all assemblies and 
accessories that may contact with food materials.

After each use, please wash all parts and wipe off water after washing.

Between two cooking procedures or after cooking, you can use the "Pre-cleaning "mode to 
wash the mixing bowl. You can find this mode in the Mode homepage.

To clean the mixing blade set and mixing bowl thoroughly, please disassemble the mixing bowl 
by following the Instructions for the Use of Parts section in this operation manual.

Do not use objects with sharp edges or metal scourers to clean the mixing bowl, but special 
detergents for stainless steel.

Please be careful with the mixing blade set when cleaning and handling it. Do not touch the 
sharp edges of the mixing blade set.

To guard against inadvertent dropping of the mixing blade set, be careful when dismounting it.

Never insert your hand into the mixing bowl when it has been mounted to the main engine 
frame.

To clean the surface of plastic accessories (e.g., the simmering basket), please use soft cleaning 
cloth and dish soap.

All accessory tools including mixing blade set, blade cover, steamer set, simmering basket, 
slow-cook plug, measuring cup, whisk, scraper, and tea spoon set, are dishwasher safe. 

Always disconnect the power source before cleaning the main engine frame.

Clean the main engine frame with a moist cloth and mild detergent.

Do not use excessive water for cleaning in case water or moisture may leak into the main engine 
frame.

The mixing bowl and mixing blade set may be damaged if they are soaked in water, other 
liquids, or residual food for a prolonged period of time. Therefore, please wash and dry them in 
a timely manner after use.

Cloud Recipe

4.3

Cleaning and maintenance

4.4

Prolonged stewing or contact with acidic substances could lead to rust. Therefore, please 
carefully check for debris from your cooking ingredients.

4.4.1   Cleaning

4.4.2   Maintenance

Summary of Contents for Omni Cook



























Reviews: