TOKIT Omni Cook Operation Manual Download Page 23

21

07

IMPORTANT SAFEGUARDS

Service restrictions

The normal working altitude of the product ranges from 0 m to 2000 m.
The product shall not be placed in an unbalanced or humid environ-
ment or close to fire or other heat sources (such as a stove). The 
distance to such heat sources should preferably exceed 30 cm.
Do not place the main engine frame on cooking stoves (high-temperature 
area, ceramic  heater top, induction cooker, etc.) or a heated surface.
Minors are not allowed to operate this product, even under the 
supervision of an adult. Please keep this product and its power cord 
out of reach of children.
This product is not a toy for minors.
People with physical, cognitive, or mental disability or those lacking relevant 
knowledge or experience shall not operate this product, even under the 
supervision of their guardian.
This product is for home use only, and its designed capacity meets the 
needs of an average family. It shall not be used for any purpose other 
than those specified in this Operation Manual.

Power line 
precautions

Only use the supporting AC power cord.
In case of damage, the power cord must be replaced by the manufacturer or 
its maintenance department or a professional of a similar department.
Disconnect the AC power cord from the AC socket before maintenance or 
moving.
Do not over-pinch, bend or twist the AC power cord, or its core may be 
exposed or broken.
Do not use the supplied AC power cord on any other device.

Power supply 
precautions

Do not use power supplies other than 120V AC to avoid electric shock or fire 
disaster.
Be sure to disconnect the power plug by holding the plug firmly with your 
hand to avoid electric shock or short circuit fire. Do not pull the AC power 
cord when disconnecting it.
Do not allow children to operate the device alone. Keep it out of reach of 
infants and young children to avoid the occurrence of electric shock, scald, 
and other dangerous accidents.
Do not plug or disconnect the power plug with wet hands to avoid electric 
shock or injury.
Use an independent power socket with its ground wire at a rated current 
above 16 A to avoid fire hazard and other accidents.

About the 
environment

Steam and heat will cause damage, discoloration, and deformation to walls 
and furniture, so please keep the product more than 30 cm away from walls 
and furniture during use.
When using the device in a kitchen cabinet or other similar places, please 
ensure sufficient ventilation.

Summary of Contents for Omni Cook



























Reviews: