Tokheim ProGauge MAGLINK LX, Configuration Manual

Page: 4 / 28

MAGLINK LX Configuration Manual | Preface
Rev. 09,
– April 2016
Page 4 of 28
1 P
REFACE
Start Italiana S.r.l. has made every effort to keep this document complete, accurate and updated. With
every revision of the console, the corresponding information is periodically added to the document. Start
Italiana S.r.l. reserves the right to make unannounced improvements and/or changes in the product and/or
associated programs. Start Italiana S.r.l. is not liable for damages of any kind, including those resulting in
the document, including typographical errors.
Making copies, citing quotes or other reproductions of all or part of this document is permitted only after
written consent of Start Italiana S.r.l.
Trade mark or name is protected by patents.
Copyright 2015© Start Italiana S.r.l. – All rights reserved
2 G
ENERAL
W
ARNINGS
Before working on this equipment, please carefully read this instruction in this manual.
Authorised and trained personnel must perform configuration changes and updates.
The manufacturer is not responsible for any operation performed which is not covered in this manual.
Any tampering with the equipment and software relieves the manufacturer of any responsibility in regards
to competent bodies.
In case of failure or defect, refer to an authorized service provider or manufacturer directly.
The manufacturer accepts no responsibility for any injury and/or damage to persons and/or property
and/or pets caused by failure to follow instructions relating to safety.
Qualified and trained staff must have an understanding of the safety requirements mentioned in this
manual, the user manual and in the installation manual.
In case of doubt concerning the operation of the equipment refer to an authorized service provider or
manufacturer directly.