Tokheim ProGauge MAGLINK LX, Configuration Manual

Page: 17 / 28

MAGLINK LX Configuration Manual | "Admin" Pages
Rev. 09,
– April 2016
Page 17 of 28
8.3 Strapping Table
The following image shows the "Strapping Table Page":
The Strapping table is used to calculate the volume of the tank, given that each tank has its own shape and
its own height.
After selecting the tank from the "tank" drop down, you can enter the information table in three different
ways:
1.
Create table manually:
This method allows you to generate a complete linear table where the user
must enter the switch from one level to the next. The table is created taking into account the total
height of the tank. Press the button "Create new Information Table” the table is generated and
displayed on the right side of the page. Only level values are compiled the user must enter the
values of the corresponding volume. Once generated the user can add new ones, change existing
ones and/or deleting some with discretion:
•
Add:
Set the value in mm and litres and press "Add new line."
•
Edit:
Set the desired level (mm) and/or the volume (litres) for rows to edit
•
Delete:
Check the box next to the "Delete" button if you want to delete the entire
Strapping table or put a check on lines to be deleted after finishing ticking all the lines press
the "Delete" button
2. Import Table : When you have a Strapping table in Excel (CSV format) you can import it by using the
"Choose File" and "Load" button. The table appears on the right side of the page
3. Duplicate table : It is possible to duplicate the Strapping Table of a tank for other tanks, one tank at
a time. The source tank is selected from the "tank" drop-down list. The target tank is selected from
the drop down "Destination Tank.” Pressing the "Duplicate" button will duplicate the Strapping
table from source tank to destination tank. Duplicating a table is saved automatically for the
destination tank
Additional buttons on the table:
•
Validation of Strapping Table : During data entry you can check the consistency of the data entered
by pressing this button in case of error or omission the corresponding lines are shown in bold red
•
Save Strapping Table : At the end of any changes press the button to save the data.
•
Cancel changes to Strapping Table : By selecting cancel changes you can undo all the changes made
and start again.
After entering the information table and/or having made any changes to the existing ones press the "Apply
changes made to tables" button to take effect, otherwise all changes will take effect the next time you
restart the application or the console itself.