Tokheim Crypto VGA, Component Technical Manual, Page: 12 / 74

Page 1-6
Document Ref 942179-001 Rev 1
Crypto VGA Component Technical Manual
1.5.5 PERSONAL PROTECTIVE EQUIPMENT (PPE)
PROTECTIVE CLOTHING
The following clothing should be worn at all times during installation and
maintenance procedures:-
•
Protective helmet.
•
Protective shoes (conductive).
•
Protective gloves and/or protective hand cream.
•
Anti static clothing.
•
Eye protection.
SAFETY EQUIPMENT FOR WORKING IN HAZARDOUS AREAS
The following safety equipment is required for working in hazardous areas:-
•
Only spark free tools are permitted for work on dispensers.
•
Work on bearings is only permitted using the standard workshop tools authorised
for this kind of work.
•
The use of all electrical tools is strictly prohibited.
•
Only the use of explosion protected work lights is permitted.
•
The use of telecommunications equipment in hazardous areas is strictly prohibited.
SAFETY INSTRUCTIONS
The following safety instructions must be adhered to during installation and
maintenance procedures:-
•
Inhalation of petrol vapour must be avoided. Suitable precautions must be taken
and where necessary respirators used.
•
Avoid direct contact of fuel with the skin.
•
Use suitable protective clothing, protective gloves and/or protective hand cream.
•
Avoid fuel spills.
•
No smoking, no naked flames are permitted.
•
Long hair and ties can get caught in moving parts. Hair must be suitably covered.
Issue A