Tokai LAR-82B, User Manual

Page: 19 / 42

18
on automatically. After the call is completed, the radio will revert to standby mode.
7. A2DP MODE
To transfer the audio of a file played by Mobile Phone to the Car Audio Player If the mobile phone supports A2DP
and could play audio or video files, when the Mobile Phone plays an audio file(For some Mobile Phones, you must
first select Play by BT ), the playback will be transfered to the Car Audio Player.
In A2DP mode, if the Bluetooth device of the Mobile Phone supports AVRCP, the functions of the >>|, |<< and
PLAY/PAUSE buttons are the same as one in media mode(no fast forward/backward functions for the >>|/|<<
buttons). The other buttons normally available in media mode are not available.
9.TROUBLE SHOOTING
NO POWER OR NO
SOUND
The car’s ignition switched off If the power supply is properly connected to the car
accessory, switch your ignition key to ACC or ON
Cable is not correctly connected. Check connection.
Fuse is burnt Replace the fuse.
MUCH NOISE IN
BROADCASTS
Station or signal is too weak. Select other stations of stronger signal level.
PRESET STATION IS
RESET
Battery cable is not correctly
connected. Connect the battery cable to the terminal that is
always live.
USB or SD CARD IS
CONNECTING BUT NO
SOUND
USB or SD card connection is not
good. Take it out and insert again.
USB or SD car is damaged or no
music file inside. Change to another USB or SD or record music inside
it.