Tokai LAR-82B, User Manual

Page: 18 / 42

17
Press RPT button twice to play the tracks in the directory repeatedly, and the LCD will display RPT DIR.
Press RPT button thrice to RPT ALL function, and the LCD will display RPT ALL.
8. Toplay tracks in random
During playback, press RDM button briefly to play all tracks in random. Press it again to cancel RDM function.
9. Tracks search
Press and hold AP button, it will activate TRACK SEARCH mode . The LCD will display TRK *** . Then rotate VOL knob to
input track numbers.
For example, you want to play TRK 108, first inputting number 1,then inputting number 0( after 0 jumps to high position),
finally inputting number 8. With all of the numbers input press SEL button for confirmation and playback.
Note: During inputting track numbers, briefly press the AP button to delete the wrong input numbers.
8. BLUETOOTH
1. Pairing
Turn on Bluetooth mode of mobile phone, then select the function for Finding Bluetooth Device and enter it. After
finishing finding, it will show the name of Bluetooth Device if found, select it and enter it, then the LCD of the car audio
system will display CONNECT, BT ON and PHONE one by one.
(Password “0000" if necessary)
2. Connection or disconnection
A) Use mobile phone to do connection or disconnection
1) In connection status, find the paired and connected Bluetooth Device,then press the disconnection button to
do disconnection.
2) In disconnection status, find the paired and disconnected Bluetooth Device, then press the connection
button to do connection.
B) When powering on (after Acc of the car was switched off), the unit will search and connect the last
connected mobile phoneautomatically.
Note:
(1) PHONE appears on LCD only when in connection status.
(2) In connection status: Mobile phone transfers to car audio player whenever a dialing takes place; Mobile phone
transfers to car audio player whenever receiving a call.
3. Dialing when in connection status
To make a call simply press the TEL button and enter the number you wish to call using the mobile phone.
4. Accept/ Reject/ End Call
During ringing, press TEL button to accept the call.
During ringing, press HANG UP button to reject the call.
During talking, press HANG UP button to end the call.
5. Talking volume level setting
While talking, use volume control to adjust volume level, but this volume level can not be saved.
6. Dialing or receiving calls while the unit is in sleep mode
When the car radio is in standby mode (Acc on and Power off), when dialing or receiving a call, the car radio will power