10
6.
TROUBLE SHOOTING
NO POWER OR NO
SOUND
The car’s ignition switched off
If the power supply is properly connected to the car
accessory, switch your ignition key to ACC or ON
Cable is not correctly connected.
Check connection.
Fuse is burnt
Replace the fuse.
MUCH NOISE IN
BROADCASTS
Station or signal is too weak.
Select other stations of stronger signal level.
PRESET STATION IS
RESET
Battery cable is not correctly
connected.
Connect the battery cable to the terminal that is
always live.
USB or SD CARD IS
CONNECTING BUT NO
SOUND
USB or SD card connection is not
good.
Take it out and insert again.
USB or SD car is damaged or no
music file inside.
Change to another USB or SD or record music inside
it.
7.
TECHNICAL SPECIFICATIONS
Supply Voltage
DC 12 V. Negative Ground
Current Consumption
5A
Power Output
4x 45Watts
FM Frequency range
87.5MHz -108MHz
Unit Dimensions
178[W] X 165[D] X 50[H] mm.
Net weight
0.7kg
IMPORTANT:
If you want to leave your USB stick or memory card connected to your car audio, it is IMPORTANT to
switch off the device before turning off the ignition key of your car otherwise sometimes the sound will
be cut off.
In case no sound; please reset your car radio by folloing the RESET instruction (see RESET operating
instructions in the manual).
