Once the connection to the TBS12 is established, you can create a
configuration file for your device
to start with a default configuration, click on File / Load Default
Settings
if you have an existing file you want to open or to use as the
template for the new device, select
File / Load and then
choose the desired file
from the TBS12 Menu select
Settings / Boards
the Board configuration screen will display
from the Select Boards list box, choose the TBS12 type you are
working with e.g. TBS12H/B/S
you can the progress to setting up the various parameters.
5.1. Board Information
The Board Information area shows you the ID number allocated to the unit
and the firmware version
•
Device ID: this is a hexadecimal number used to uniquely identify
the device
◦
this can be used to track the location and history of a PCB
◦
the Device ID should be set when the device is new and then
remain with the device even if it is moved from one location to
another
•
FW Version: this shows the version of the firmware loaded in to the
board. You can also fetch this from the menu using
View / Get
Firmware Version
◦
the TBS12 firmware version must always match the Console
firmware version.
