20
DIGITAL TORQUE WRENCH “DATA TORK” MODEL
CEM3-G
(8) Data clearance
Delete the measured data.
DUAL MODE
LCD MODE
N·m
52.0
10 : 30
200
N·m
200
52.0
(Delete 1 data)
Select the data to delete and push
N·m
0.0
10 : 30
200
N·m
200
0.0
Data clearance complete
N·m
52.0
10 : 30
200
N·m
200
52.0
(Delete range of data)
Set the upper end of data
N·m
1
200
STT
N·m
200
STT
1
Set the lower end of data
N·m
200
200
N
N·m
n
200
N·m
0.0
09 : 30
001
N·m
001
0.0
Data clearance complete
1) Delete 1 data
1. Use
key to select the data
to delete.
2. Push C key to delete.
2) Delete the selected range of data
1. Use
key to set to counter
to the upper end of data to
delete and push
.
2. Use
key to set the
counter to the lower end of data
to delete and push
.
Note) In M-2 mode, lower end can
only be set to 1 (STT1).
3. Push key
and key
at
the
same time, then the screen
shows "CLEAR" and blinks. It
returns to the original display
and deletion is complete.
It shows the number of data to delete. Push
and
at the same time
Note) Data clearance (
key +
key) is effective when the screen shows either “N” (number
of data), “MAX” (maximum value), “MIN” (minimum value) or “AVE” (average value).
CEM3-G取扱説明書.indd 21
CEM3-G取扱説明書.indd 21
2016/07/14 11:25:09
2016/07/14 11:25:09
