7
DIGITAL TORQUE GAUGE MODEL
ATGE-G
(5)
Memory Key
Saves the measured data and moves the counter forward to the next. The displayed
measurement data is output to the external device. When auto memory (0.1 to 5 sec.) is in
effect, MEM key cannot be used for saving.
(6)
Mode Key
This key selects the number of sample, max/min/average value, etc. Keep this key pushed to
go to various settings (changing torque unit, auto memory/reset, baud rate, buzzer ON/OFF).
(7)
Clear Key
In the PEAK mode, this key is used to reset the peak value or to delete the stored data.
In the RUN mode, auto zero adjustment is performed.
(8) External Output Terminal
This is the terminal for connecting the USB connection cable (option).
(9) Reset Switch
If any display error or malfunction occurs, press the reset switch.
(10) Battery Cover
A coin-shaped lithium battery (CR2450) is set inside.
At the time of purchase, an insulated film is inserted. Take out this film before use.
(11) Three-jaw Chuck
Clamps the object to be measured.
(12) Chuck holder
When clamping an object with the three-jaw chuck, hold this part to tighten or loosen in order
to hold the object.
Note : Hold the chuck holder when opening/loosening the three-jaw chuck.
ATGE-G型 取扱説明書̲CS5.indd 8
ATGE-G型 取扱説明書̲CS5.indd 8
2016/06/06 16:37:24
2016/06/06 16:37:24
