TOHATSU MFS 8A3, Owner'S Manual

Page: 37 / 72

EPT type
① Operate the Power Tilt switch and
tilt the outboard motor up. (The
Main Switch must be "ON".)
The outboard motor can also be
tilted up using the switch provided
under the bottom cowl. (The Main
Switch need not be turned "ON" in
this case.)
EFT type
①
Operate the Power Tilt switch and
tilt the outboard motor up.
② Lock the tilt with the Tilt stopper
after the outboard motor has been
tilted up.
③
Manual tilting
If the battery is dead, and the
Power Tilt Switch inoperative,
turn the manual valve to counter-
clockwise. This will allow manual
tilting of the outboard motor.
37
1
2
3
4
5
6
7
8
9
10
11
12
13
ENGINE OPERATION
Note
Stop the engine before adjusting trim
angle.
!
�������
Excessive trim up or down may lead
to unstable boat operation, potentially
causing the steering difficulty that
leads to accident during cruising.
●
Do not cruise at high speed if
improper trim position is suspected.
Stop the boat and readjust trim
angle before continuing cruise.
●
For outboard motor model with PTT
switch on the bottom cowl, do not
operate the switch during cruising,
or control of boat may be lost.
UP
DN
Tilt Stopper
MANUAL
POWER