TOHATSU MFS 8A3, Owner'S Manual

Page: 35 / 72

EFT and EPT type
■
Improper Trim Angle (bow rise too high)
If the trim angle is excessive, the
bow will rise out of the water and the
speed will decrease.
Furthermore, the bow may sway or
the bottom may slam the water while
cruising.
In this case, decrease the trim angle
by pressing the switch on the Remote
Control Lever to "DN".
■
Improper Trim Angle (bow dips into the
water)
If the trim angle is too small, the bow
will dip into the water, the speed will
decrease, and water may enter the
boat. In this case, the trim angle
should be increased by pressing the
switch on the Remote Control Lever to
"UP".
■
Proper Trim Angle
The trim angle is optimum when the
boat is parallel to the water surface
while running.
35
1
2
3
4
5
6
7
8
9
10
11
12
13
ENGINE OPERATION
Down (DN)
UP
EPT model
EFT model