ENGINE OPERATION
38
7
(For electrical starter type)
5. Push the starter switch button and
release the button when the engine
has started.
1.
Starter Button
ENOW00032-1
Do not hold turning starter motor more than
5 seconds, or the battery may be consumed,
p otenti ally making the eng ine star ting
impossible and/or damaging the starter.
If cranking over 5 seconds fails to star t
engine, return main switch to “ON”, and
crank engine again after 10 seconds or more.
6. After engine starting, return the
choke knob while check the engine
speeds. if the engine speeds unstable,
pull the choke knob to operated.
7. Check the cooling water from cooling
water check port.
Side mount RC type
1. Be sure to install the stop switch lock
to the stop switch, and attach the
stop switch lanyard securely to the
operator or to the operator's PFD
(Personal Flotation Device.)
1.
Stop switch lock
2. Insert the main switch key.
3. Set the control lever in the Neutral
position.
4. Raise the free accel lever a little
( b o th of c old e n g in e an d war m
engine).
1.
Neutral (N)
2.
Control lever
3.
Fully opened (Forward)
4.
Fully opened (Reverse)
5.
Free throttle lever
6.
Main switch key
7.
Stop switch
CAUTION
ENOF00520-0
1
ENOF01411-1
1
ENOF008691
N
R
F
1
2
3
4
5
6
7
ENOF00870-1
Summary of Contents for MFS 6BZ
