Bracket
7-10
4st 2/2.5/3.5 2007
2
1
a
b
d
d
c
c
h
4
3
f
g
e
i
5
4
6) Adjustment of Throttle Cable
1.
Turn throttle grip
1
to full close position
a
.
2.
Pull choke rod
2
fully
d
.
3.
Attach throttle cable
3
to throttle drum
4
taking care of
positions of low speed side
e
and high speed side
f
.
4.
Pull outer cable
g
of throttle cable
3
to the side shown with
the arrow by hand, and lock it with the nut while applying
tension to the cable.
8.
Turn throttle grip
1
from full close position
a
to full open
position
b
, and check that the throttle lever of carburetor
6
touches the full open stopper
j
. Then, return the throttle
grip
1
from full open position
b
to full close position
a
, and
check that the throttle lever of carburetor touches the full
close stopper
k
(throttle stop screw
L
).
5.
Attach high speed side
f
cable and low speed side
e
cable
by using the same way.
6.
Push back choke rod
2
fully
c
. (wide open choke)
7.
Turn throttle grip
1
to full close position
a
.
Push inner cable
h
with a finger to check that
the cable deflects approximately 1mm (0.04in)
at the center.
Check that the gap
i
between the projection of
throttle drum
4
and dent of throttle opener
5
is
within the range from 0.5 - 1.0 mm (0.020 - 0.040 in).
j
k
L
6
MFS2̲sec07̲070524.qxd 07.5.24 4:49 PM ページ 10
