5
5-43
4st 2/2.5/3.5 2007
43) Assembly of Recoil Starter
Reverse disassembly procedure to assemble by
taking care of the following matters.
1.
When setting starter spring into reel
1
, face starter spring
outer edge hook to the right and set it into peripheral cut of
starter case.
2.
Run starter rope through rope guide
2
and connect to reel
1
.
3.
When installing reel
1
into starter case, set projection of
starter case in the internal hook of starter spring.
4.
Apply low temperature resistant lithium grease.
· Starter Spring
· Friction Plate
5.
Put starter shaft screw and tighten to specified torque.
LIT
GREASE
LIT
2
1
1
a
Starter Shaft Screw :
5 N · m (4 lb · ft) [0.5 kgf · m]
6.
When applying tension to starter spring, hook starter rope
into reel groove
a
, and turn reel 4 to 5 times to direction
to which the reel rotates when pulling out starter rope
(counterclockwise).
2
Rope Guide
TB
1342
1342
1342
LIT
GREASE
LIT
4
3
3
Friction Plate
4
Starter Shaft Screw
MFS2̲sec05̲070524.qxd 07.5.24 3:18 PM ページ 43
