TOHATSU M 40D2, Owner'S Manual

Page: 44 / 89

ENGINE OPERATION
44
7
(For manual starter type)
4. Pull the starter handle slowly until you
feel engagement, keep pulling till you
feel less resistance. Then pull it
quickly. repeat if necessar y until
started.
1. Slowly
2. Quickly
3. Starter handle
(For electrical starter type)
4. Turn the main switch key to ON posi-
tion
5. Turn the main switch key to START
position and release the key when the
engine has started. The key returns to
the original position, automatically.
1. ON
2. START
3. OFF
6. Return the choke knob fully after
engine has started.
7. Check the cooling water from cooling
water check port.
1. Cooling water check port
2. Idle port
ENOM01663-0
Side mount RC type
1. Be sure to install the stop switch lock
to the stop switch, and attach the
stop switch lanyard securely to the
operator or to the operator's PFD
(Personal Flotation Device.)
1. Stop switch lock
2. Insert the main switch key.
3. Set the control lever in the Neutral
position.
1 2
3
ENOF00519-0
ENOF01958-0
3
1
2
1
2
ENOF01911-0
1
ENOF00869-1