TOHATSU M 40D2, Owner'S Manual

Page: 39 / 89

PRE-OPERATING PREPARATIONS
39
6
Remedy
1. Reduce the throttle to less than half
opening, and move to safe place
quickly, and stop the engine.
Check the propeller for bent or dam-
aged blades.
Consult an authorized dealer if engine
shows the same result even after
replacing propeller with new one.
2.
Move to safe place quickly, and set
the Remote Control Lever to Neutral
(buzzer will stop). And then, stop the
engine.
Check the engine oil level, and add
engine oil if necessary.
S tar t the engine, and move the
Remote Control Lever Forward care-
fully. Confirm that the indicator lamp
goes out.
3. Move to safe place quickly, and check
the discharge of cooling water from
the water check port at idle speed
and stop engine.
Remove any foreign matter on the
gear case and propeller if necessary.
Consult an authorized dealer if no
discharge of cooling water.