TOHATSU M 40D2, Owner'S Manual

Page: 27 / 89

INSTALLATION
27
5
1. Clamp Screw
2. Washer (small diameter)
3. Washer (large diameter)
4. Bolt (12 mm × length 105 mm)
5. Nylon locking nut
1. Top of transom
Power trim and tilt type
1. Set the outboard motor to appropri-
ate position.
2. Secure the clamp brackets to the
transom board using bolts, flat wash-
ers and nylon locking nuts.
1. Bolt (12 mm × length 105 mm)
2. Washer (large diameter)
3. Washer (small diameter)
4. Nylon locking nut
ENOW00008-B
z Upper mounting bolts should be installed
with the bolt head at inside surface of the
transom. Mounting bolts installed with the
threaded end at the inside surface of the
transom can cause personal injury.
5
4
3
2
1
ENOF00610-0
ø13
ø13
234 (9.21”)
39 (1.54”)
222 (8.74”)
248 (9.76”) 26 (1.02”)
204 (8.03”)
25 (0.98”)
25 (0.98”)
64 (2.52”)
89 (3.50”)
117 (4.61”)
102 (4.02”) 102 (4.02”)
117 (4.61”)
1
ENOF00611-0
CAUTION
4
1
2
3
ENOF00612-1
251
ø12.5
ø12.5
253.5
(2.0”)
(10.0”)
56
(2.2”)
18
18
18
51
327
(12.9”)
(9.9”)
ENOF00613-0