TOHATSU M 25H, Owner'S Manual

Page: 36 / 76

ENGINE OPERATION
34
7
(For manual starter type)
5. Pull the starter handle slowly until you
feel engagement, keep pulling till you
feel less resistance. Then pull it quickly.
repeat if necessary until started.
1. Slowly
2. Quickly
3. Starter handle
(For electrical starter type)
4. Push the starter switch button and
release the button when the engine
has started.
1. Starter switch button
ENOW00032-0
Do not keep turning starter motor for over
5 seconds, or the battery may be con-
sumed, potentially making the engine start-
i n g i m p o s s i b l e a n d / o r d a m a g i n g t h e
starter.
If cranking over 5 seconds fails to start
engine, return main switch to “ON”, and
crank engine again after 10 seconds or
more.
5. Return the choke knob fully after
engine has started.
6. Check the cooling water from cooling
water check port.
1. Cooling water check port
2. Idle port
Side mount RC type
1. Be sure to install the stop switch, and
attach the stop switch lanyard securely
to the operator or to the operator's
PFD (Personal Flotation Device.)
1. Stop switch lock
2. Insert the main switch key.
3. Set the control lever in the Neutral
position.
4. Raise the free accel lever a little (both
of cold engine and warm engine).
CAUTION
1 2
3
ENOF00519-0
1
ENOF01850-0
ENOF01811-0
1
2
1
ENOF00869-0