TOHATSU M 25H, Owner'S Manual

Page: 30 / 76

PRE-OPERATING PREPARATIONS
28
6
1. Air vent screw
2. Fuel tank cap
2. Open the fuel tank cap slowly.
3. Fill the fuel carefully not to over flow.
4. After filling the tank, close the fuel tank
cap.
ENOM01002-0
ENOW0002A-A
Use of engine oils that do not meet these
requirements will result in reduced engine
life, and other engine problems.
Use a genuine engine oil or recommended
one (TCW3). Refer to your Distributor.
Will not recommend use of other two
stroke engine oil.
Add engine oil into fuel oil tank. The mixing
ratio with gasoline is 50 : 1 (50 parts gaso-
line and one part oil). Mix well by hand. The
mixing ratio during break-in running is 25 :
1.
Mixing Ratio
ENOM01003-0
Engine oil – gasoline mixing
procedure
ENOW00937-0
z
Do not use other than two stroke engine
oil with specified grade, or the engine
may be damaged.
z
Do not use fuel prepared in other than
specified mixing ratio.
- Lack of engine oil can cause severe
engine trouble such as piston seizure.
- Excess of engine oil can shorten spark
plug life, and/or cause increase of nox-
ious exhaust.
3. Engine oil recommendation
CAUTION
2
1
ENOF00027-A
SAFE FILL
LEVEL
25 L
NIVEAU
MAXIMUM
ENOF00030-B
Gasoline : Engine Oil
During break-in 25 : 1
After break-in 50 : 1
CAUTION
ENOF01708-0
10L
(10 : 0.2)
(10 : 0.4)
(25:0.5)
(25:1)
2L 25L 30L
0
0.2L
0.4L
0.5L
1.0L
25 : 1
50 : 1
Oil
Fuel by Oil Mixing (50:1, 25:1)
Gasoline