Todo HS-00808, Instruction Manual

Page: 6 / 76

6
ENGLISH
GENERAL SAFETY WARNINGS
• Never leave the TODO™
unattended during operation or
whilst cooling.
• Ensure that the TODO heating plate
does not come into contact with
surfaces that may be damaged
through excessive heat.
• Regularly check the cord for
damage. Should the cord be
damaged in any way it must only be
replaced by the manufacturer, their
agent, or a similar qualified person
in order to avoid electric shock.
• Regularly check the unit, but do not
switch it on if it appears damaged
or is operating incorrectly. Do not
attempt to carry out any repairs to
the unit in any way, repairs must be
carried out by a suitably qualified
technician. There are no user-
serviceable parts inside.
• This appliance is not intended for
use by children or persons with
reduced physical, sensory or mental
capabilities, or lack of experience
and knowledge, unless they are
supervised by a person responsible
for their safety. Children should
not be allowed to play with the
appliance.
• Close supervision is necessary when
children are around and be aware
that units can be pulled off work
surfaces or similar areas by the
unwary.
• Never allow the cord to touch wet or
hot surfaces, become twisted or be
within the reach of children or
animals.
• Always allow the unit to cool before
attempting to move it and never
reposition or move the unit by
pulling the cord.
• Do not use this appliance for
anything other than the intended use.
• Unplug from socket when not in use
• or before cleaning.
• Pull on the plug, not the cord.
• Warning - This machine heats up to
approx. 80°C. When using metal
dies they will conduct heat and
therefore, become hot. Be careful
when removing metal dies from
the heating plate. Allow to cool for
30 minutes before
removing metal plates with your
hands. Alternatively, TODO offers
accessories such as silicone mat and
handling device.
• Do not immerse the TODO machine
or heating plate in water.
• Do not touch the heating plate of
the TODO machine with your hand
during operation.
• Do not overload the power socket.
• Never lift the TODO machine by the
roller mechanism.