20.
Never attempt to steam clothing while wearing.
21.
Never push the steam button or direct steam toward anyone’s
face or close to skin; doing so could burn or scald skin
or eyes.
22.
To reduce the likelihood of circuit overload, do not operate
another high-wattage appliance on the same circuit as your
steamer.
23.
If an extension cord is absolutely necessary, a 15 amp rated
cord should be used. Cords rated for less amperage may
overheat. Care should be taken to arrange the cord so that
it cannot be inadvertently pulled or tripped over.
24.
To prevent steam from causing bodily injury or damage to
surfaces, never lay steamer on floor while turned “ON”.
25. NEVER USE DETERGENT, CLEANING CHEMICALS OR
ANYTHING OTHER THAN WATER IN YOUR STEAMER’S
WATER TANK. SOME OF THESE SUBSTANCES ARE
HIGHLY FLAMMABLE WHICH COULD RESULT IN BODILY
INJURY OR DEATH, AND SOME ADDITIVES WILL
CORRODE OR CLOG INTERNAL PARTS.
SAVE THESE INSTRUCTIONS!
HOUSEHOLD USE ONLY
5
10
HOW TO STEAM
OPERATING STEAMER
1.
Add water according to OPERATING INSTRUCTIONS section.
2.
Plug steamer cord into electrical outlet. Power indicator light
will glow red.
3.
When the Power indicator light goes off,
TOBI Steam Wand
™
is ready to use.
4.
Run steam plate or brush attachment evenly over area to be
steamed, pumping the steam button on the handle up and
down to release steam. When steaming, touch material lightly
with steam plate or brush attachment and move up and down
to remove wrinkles. Continue to pump the button up and
down to maintain a consistent flow of steam. It is important
that you make contact with the garment and/or fabric you are
steaming.
5.
TOBI Steam Wand
™
may be used in any direction, horizontally
or vertically.
6.
If water gets low, unplug
TOBI Steam Wand
™
and allow to cool
completely. Next, remove water tank plug and add more water
without exceeding the maximum amount of about 140 ml.
Re-insert water tank plug securely and resume use. DO NOT
ALLOW THE WATER TANK TO RUN ON DRY WHILE
STEAMING, AS THIS COULD DAMAGE YOUR STEAMER.
7.
When steaming,
TOBI Steam Wand
™
’s power indicator light
will repeatedly go off and on. This is a normal part of
TOBI
Steam Wand
™
’s functioning as it constantly adjusts itself to
the optimal temperature.
