3
6
7
8
8
9
10
11
12
13
TABLE OF CONTENTS
IMPORTANT SAFEGUARDS
KNOW YOUR TOBI
STEAM WAND
TM
TOBI STEAM WAND
TM
FEATURES
BEFORE FIRST USE
ADDING ATTACHMENTS
OPERATING INSTRUCTIONS
HOW TO STEAM
FOR BEST RESULTS
MAINTENANCE
CLEANING MINERAL DEPOSITS
13
CLEANING MINERAL DEPOSITS
One common problem that may occur with a steamer is mineral
deposits caused by a high mineral content in many municipal
water supplies. Mineral residue inside of the internal pipes and
heater can cause intermittent steaming or, in some cases, no
steaming at all.
NOTE:
To reduce or eliminate the occurrence of mineral deposits, we
recommend the use of de-mineralized or distilled water in the unit.
However, regular tap water can also be used.
The recommendations that follow can be used to reduce mineral
deposits. If not using de-mineralized or distilled water, we
recommend you follow this procedure monthly.
1.
Make sure the unit is unplugged and cool.
2.
Mix a solution of 50% vinegar and 50% water. 2 ounces of this
solution will be sufficient.
3.
Remove the water tank plug and slowly pour the mixed
solution into the water tank and replace the water tank plug.
4.
Let it stand for 40 minutes.
5.
Drain the solution out of the water tank unit into a sink or tub.
6.
Pour clean water in the tank and drain. Repeat this step until
the vinegar odor dissipates.
7.
Reassemble the unit and operate normally.
