5
LINE CORD SAFETY TIPS
1. Never pull or yank on cord or the appliance.
2. To insert plug, grasp it firmly and guide it into outlet.
3. To disconnect appliance, grasp plug and remove it from outlet.
4. Before each use, inspect the line cord for cuts and/or abrasion marks. If any are
found, this indicates that the appliance should be serviced and the line cord replaced.
5. Never wrap the cord tightly around the appliance, as this could place undue stress
on the cord where it enters the appliance and cause it to fray and break.
DO NOT OPERATE APPLIANCE IF THE LINE CORD SHOWS ANY DAMAGE, OR IF
APPLIANCE WORKS INTERMITTENTLY OR STOPS WORKING ENTIRELY.
IMPORTANT
During the first few minutes of initial use, you may notice smoke and/or a slight odor.
This is normal and should quickly disappear. It will not recur after appliance has been
used a few more times.
USING YOUR HAND MIXER
ATTACHING BEATERS:
Be sure appliance is unplugged. Align notches on beaters
with slots in hand unit, and push until they lock in place. Insert plug into any standard
household outlet. Place beaters directly into container holding ingredients to be mixed.
Set the speed control lever to the 1 (Low) position to start blending, then increase to 2
(Low-Medium), 3 (Medium), 4 (Medium-High) or 5 (High).
SPEED
DESCRIPTION
1
This is a good starting speed for bulk and dry
foods such as flour and butter.
2
Best speed to start liquid ingredients
3
For mixing cakes and breads
4
For creaming butter and sugar, beating un-
cooked candy, desserts, etc.,
5
For beating eggs, mixing icings, whipping po-
tatoes, whipping cream, etc.
REMOVING BEATERS:
Slide speed control lever to “OFF” or “O” position. Unplug
appliance. Push down on the eject button to eject beaters.
