HOW TO USE
1 mug
1. Slide the switch on the top of the machine to the 'single mug' symbol.
2. Open the Door for the Filter Basket on the right side of the unit.
3. Place the desired amount of coffee into the Permanent Nylon Filter.
4. Close the Filter Basket Door.
5. Pour fresh cold water into the Water Reservoir, up to the 'single mug' marking.
NOTE:
• If the Mug is used to fill the Water Reservoir, it should be warmed
up before making coffee. Otherwise the cool Mug may lower the
temperature of the coffee. To ensure hot coffee, warm the Mug by filling
with hot tap water. Empty and dry immediately before making coffee.
• Do not fill with water above the 'single mug' marking on the water
reservoir as the mug will overflow once the coffee has brewed.
6. Place the Mug under the right side Dispenser. The Mug Cover can be
taken off or left on. If left on, be sure that the sipping hole is in the open
position so coffee can flow through into the Mug.
7. Plug the unit into a 120 Volt A.C. outlet.
8. Press the On/Off Switch down to the 'On' position ('I') and the Indicator
Light will illuminate.
9. Important: Once the water has finished dripping into the mug, press the
On/Off Switch up to the 'Off' position. ('O')
2 Mugs
1. Slide the switch on the top of the machine to the 'double mug' symbol.
2. Open the Doors for the Filter Basket.
3. Place the desired amount of coffee into each of the Permanent Nylon
Filters. NOTE: Different flavours of coffee can be used in each of the
filter baskets.
4. Close the Filter Basket Doors.
4
TFC -42T Booklet vf.qxd 22/04/05 14:22 Page 11
