6
9. OPERATIONAL HINTS
• The microphone's service distance is 3 – 120 m. When the microphone user moves in a facility, signal
dropouts (momentary losses of signal reception) may be encountered. These dropouts are caused by the
building's architectural designs or materials which block the travel of or reflect the radio signal. If this occurs,
the user needs to change locations for better signal reception.
• The proper operation of your wireless system may be interfered with by other system operating on the same
frequency. In such cases, change the operating frequency of your system. (As to dealing with the
interference, refer to the operating instructions of the wireless tuner.)
• Should you have any questions regarding the use or availability of TOA wireless products, please contact
your local TOA dealer.
10. DISTANCE BETWEEN THE MICROPHONE AND THE MOUTH
[Lapel Wireless Microphone WM-5320]
Keep your mouth 15 – 20 cm away from the microphone for the best possible sound reproduction. Take care
not to bring your mouth too close to the microphone (within 5 cm) as this impairs speech clarity if you speak
loudly.
[Headset Wireless Microphones WM-5320A and WM-5320H]
By adjusting the gooseneck, locate the microphone with the supplied windscreen in front of your mouth, and
position it 3 – 5 cm away from your mouth for the best sound reproduction. When the microphone is too close
to your mouth or you speak too loud, speech clarity will be impaired, making it hard for the audience to hear
announcements.
8. OPERATION
Step 1.
Plug the microphone's plug into the input connector as illustrated.
Step 2.
Confirm that the wireless microphone and the wireless tuner are identical in the channel number.
If not identical, turn the power ON/OFF switch to the OFF position, then set the channel number to the
same channel number as the tuner.
Step 3.
Turn the Power ON/OFF switch to the ON position. Then, confirm the green LED of the Power/Battery
lamps will light.
For the WM-5320A, put the unit into the waist pouch as shown in the figure below.
Step 4.
Turn the Power ON/OFF switch to the OFF position after use.
Secure the connection with the plug lock.
Illustration for WM-5320A
Main unit (WM-5320)
Hook and loop fastener
Belt
Plug lock
Plug lock
Waist pouch
