5
6. BATTERY INSERTION
Step 1.
Turn off the power switch.
Step 2.
Remove the battery cover from the unit.
Slide the battery cover in the direction
indicated by the arrow while pushing down
the cover with a thumb as shown in the
figure.
Step 3.
Insert an AA battery according to (+) and (–)
indications on the battery compartment.
Step 4.
Replace the removed battery cover.
Battery replacement
• A brand-new AA alkaline battery will continuously operate the unit
for about 10 hours.
• When the battery capacity becomes low, the green LED of the
Power/ Battery lamps starts to dim, while the red LED to light.
When only the red LED lights, replace the battery with a new one.
In this condition, the unit transmits the remaining battery capacity
information to the tuner, causing the tuner's BATT indicator to light.
Red LED
Green LED
Channel setting switch
7. CHANNEL NUMBER SETTING
Step 1.
Turn off the power switch, and then remove the battery
cover.
Step 2.
Using the supplied screwdriver, set the Channel setting
switch pointer to the desired channel number.
Step 3.
Replace the battery cover.
Note
Make sure that the wireless microphone is identical to the wireless tuner in the channel number. Should the
microphone's setting differ from that of the tuner, the tuner does not receive the microphone signal.
