7
6.3 Power cord fastener installation
Use a power cord fastener to prevent fall of the power plug due to gravity of the adapter.
Step 1:
Wind the adapter wire on the power cord fastener.
Step 2:
Use the M3 x 6 screws provided along with the unit to fix the power cord on the side of the unit.
Step 2: Installation screws M3 x 6 (provided along with the unit) x 1
Note: it is not allowed to use other types of screws; or otherwise damage
may be caused to the internal parts of the unit, resulting in failure of the unit.
Step 1: Wind the adapter wire on the power cord fastener.
7.SPECIFICATIONS
Control input
No-voltage control contact input, open voltage: DC24V, short circuit current: below 5mA,
removable Terminal Plug (10P)
Control output Relay control contact output, contact withstand voltage: DC 24V, maximum current: 500mA,
removable Terminal Plug (10P)
Volume control
Dimension
Weight
Accessories
Audio input volume adjustment knob in the front
300g
Demountable wiring terminal (10P) x 1, plastic pad x 4, M3 x 6 screws x 5, M3 x 8 screws x4,
power adapter wire fastener x 1
DC power
Audio input
Electronically balanced input, phantom voltage DC17, MIC -60dB /LINE 0dB ,
removable Terminal Plug (10P)
Audio output
Electronically balanced output, 0dB , removable Terminal Plug (10P)
Network
Network I/F: 100BASE-T x 1
Network protocols: TCP, UDP, ARP, RTP, CMP, TTP, IGMP, FTP
Connecting terminal: RJ45 terminal
Sound sampling frequency: 48kHz
Quantized digits: 16 digits
71(W) × 40(H) × 82(D)mm
Material
Panel: stoving varnish-coated steel plate, black (munsell N1.0 similar color)
Frequency
characteristic
MIC 100Hz~16kHz ±3dB
，
LINE 20Hz~20kHz ±3dB
Switch
Dial switch on one side: MIC/LINE input switch, microphone phantom power supply switch
Reset switch in the front
*1
*1
*1
(*
1
)
0dB = 1Vrms
IEEE802.3af standard power supply device or DC 24V power supply
Display
STATUS indicator in the front
Optional
MB-15B
Power
consumption
2.2W or less
*1
*1
