Toa IP-100RM, User Manual

Page: 31 / 37

5-8
Chapter 5: operating description
5.4 Fire alarm
5.4.3 Input controlling to trigger the fire alarm task
Step 1: Adding the fire alarm task in the server.
1-1 Triggering device select alarm terminal, and inputting the ID number of the IP remote control
microphone;
1-2 Alarm ringing select “from the terminal alarm”.
1-3 Selecting sound source (line or microphone input).
Step 2:The MIC control input is short circuit will trigger the corresponding fire alarm task, the MIC will
broadcasting the audio of line input in appointed zone, press audio switching key can change the
sound source.
When IP remote control MIC input controlling is disconnected, the timing mining task will be stopped
immediately.