Toa IP-100RM, User Manual

Page: 30 / 37

5-7
Chapter 5: operating description
5.4 Fire alarm
5.4.1 Press the key to trigger fire alarm task
Step 1 : Configuration key is task key.
1-1 In the sever fire alarm task list, right click to binding the terminal.
1-2 Binding ID and key value of the terminal in the pop-up dialog box, the specifications please refer to
page P5-3.
1-3 The target key defined as the task key in the Web key configuration, the specifications please refer
to page P4-4.
Step 2: pressing the corresponding task key ,the timing bell task will be executed by the server, and
corresponding zone light(green) will be ON, the related zone status light(red) is always ON.
Step 3: Repressing task key, the task will be stopped, the corresponding zone and related light are off.
5.4.2 Automatically executing server fire alarm task
After adding the timing bell task to the server, the network remote control microphone will automatically
broadcast the appointed sound source, and the zone light (green) is always ON, the related zone status
light (red) is always ON, after the task finished, corresponding zone status lights will be OFF.