7. PROGRAMMING DATA TABLE
INITIAL PROGRAMMING
Note. (Mark *)
The first station of each exchange becomes the Programming Station:
Exchange "A" . . . . . . . . . . . . . . . . . . . . . . . . . No. 200 (100)
Exchange "B" . . . . . . . . . . . . . . . . . . . . . . . . . No. 470 (400)
Exchange "C" . . . . . . . . . . . . . . . . . . . . . . . . . No. 740 (700)
Initial Programming of the Exchange
1.
Place CP front-mounted program switch in "ON" position.
Dial operation from station No. 200 (100). *
2.
Dial tone will be heard (Station No. 200 (100) becomes a programming
station)
3.
Confirmation tone will be heard (Clears function group S)
10 times
4.
Confirmation tone will be heard (Clears function group A)
5.
Confirmation tone will be heard (Clears function group B)
6.
Confirmation tone will be heard (Clears function group C)
7.
Confirmation tone will be heard (Clears function group D)
8.
Confirmation tone will be heard (Clears function group E
9.
Confirmation tone will be heard.
,
(Clears personal numbers, single digit dial numbers and
10times
remote numbers)
10.
Confirmation tone will be heard (Clears function group F)
10 times
11.
Confirmation tone will be heard (Clears function group G)
10 times
12.
Dial operation to programme required functions.
(Refer to other instructions for each function)
13. Set the CP front-mounted programme switch to OFF.
14.
(Station No. 200 (100) becomes a normal station.) *
Simultaneous clearance of each function programmed into all stations.
Function Code
10 times
Confirmation tone
Simultaneous programming of each function into all stations.
Function Code
10 times
Confirmation tone
Confirmation tone
— 59 —
All manuals and user guides at all-guides.com
