Connect cables to the clip terminals according to the
following procedure:
Remove the cable outside insulation tubing so that
the wires are showing. (Cutting through insulation
of individual cable wires should be avoided)
The length of cable insulation to be removed should
be 1.5 times the length of the clip terminal.
Clamp the cable in place securely using a clamp.
Leave the insulation on the cable wires and attach
cable to the upper part of the clip terminal. Then,
holding the excess length of wire in hand, pull it
toward the access side and push it down from above
the clip terminal using clipping tool C.
The cable connection is complete when the excess
wire is cut off.
-
-
-
-
- 37 -
