8
(1)
(2)
(5)
(6)
(7)
(3)
(4)
6. SETTINGS
6.1. Setting Operations and Setting Screens
6.1.1. Keys and knobs used in settings
(1) SETTING Key
Permits the system setting screen to display. If this key is pressed simultaneously with the ALC key, the
ALC setting screen is displayed. If pressed simultaneously with the ANC key, the ANC setting screen is
displayed.
(2) METER Indication Selector Key
Selects the channel for which the signal level is indicated by the INPUT LEVEL, OUTPUT LEVEL and ALC
LEVEL indicators. The on-screen indication cycles through S (SENSOR level), 1 (Channel 1), and 2
(Channel 2) as the key is pressed.
(3) PARAMETER/PUSH-ENTER Knob
Rotating this knob while [
] is flashing in the setting screen permits either the setting content or
parameter to be selected. (Such parameters and setting contents changed begin to work in real time.)
Pressing this knob afterward permits [
] display to disappear, saving the current parameters.
Pressing this knob when the PUSH ENTER indication is displayed validates the on-screen setting item and
saves the current parameters.
(4) BACK Key
Returns the display to a previous screen.
(5) NEXT Key
Advances the display to a next screen.
(6) ALC Key
Permits the ALC function to be set to ON or OFF by rotating the PARAMETER knob. If this key is pressed
simultaneously with the SETTING key, the ALC setting screen is displayed.
(7) ANC Key
Permits the ANC function to be set to ON or OFF by rotating the PARAMETER knob. If this key is pressed
simultaneously with the SETTING key, the ANC setting screen is displayed.
