Digital mixer D-2000 Series
TOA Corporation
TOA Corporation
TOA Corporation
TOA Corporation
9/37
When Source Channel Attribute=02H: 00H - 0FH (CobraNet In channel 1 - 16)
<Bus Channel Attribute>
04H: Audio Bus channel
<Bus Channel Number>
When Bus Channel Attribute=04H: 00H - 17H (Audio Bus channel 1 - 24)
<Value>
00
～
46H : For the relationship of position to gain (dB), refer to Value vs. Gain Table for crosspoint gain.
60
～
6FH : Position Down (1
～
16 Step Down)
70
～
7FH : Position Up (1
～
16 Step Up)
Example of setting the crosspoint gain from Audio In channel 1 to Audio Bus channel 1 to 0dB:
95H, 05H, 00H, 00H, 04H, 00H, 46H
Example showing 3-step Up of Audio In channel 1 to Audio Bus channel 1 crosspoint gain
95H, 05H, 00H, 00H, 04H, 00H, 72H
Output assignment
Set the output assignment (Output matrix crosspoint) to ON or OFF.
The D-2008SP transmits changed value data after receiving this command.
96H, 05H, <Bus Channel Attribute>, <Bus Channel 1umber>, <Destination Channel Attribute>,
<Destination Channel 1umber>, <O1/OFF>
<Bus Channel Attribute>
04H: Audio Bus channel
05H: Ext. In channel
06H: CobraNet Bus channel
<Bus Channel Number>
When Bus Channel Attribute=04H: 00H - 17H (Audio Bus channel 1 - 24)
When Bus Channel Attribute=05H: 00H - 03H (Ext. In channel 1 - 4)
When Bus Channel Attribute=06H: 00H - 0FH (CobraNet Bus channel 1 - 16)
< Destination Channel Attribute>
01H: Audio Out channel
03H: CobraNet Out channel
< Destination Channel Number>
When Destination Channel Attribute=01H: 00H - 1FH (Audio Out channel 1 - 32)
When Destination Channel Attribute=03H: 00H - 0FH (CobraNet Out channel 1 - 16)
<ON/OFF>
00H: < Bus channel> to <Destination channel> assign OFF
01H: < Bus channel> to <Destination channel> assign ON
Example of setting the output assignment from Audio Bus channel 1 to Audio Out channel 1 to ON:
96H, 05H, 04H, 00H, 01H, 00H, 01H
