CS-530BS-EB/CS-660BS-EB Instruction Manual
3
TOA Corporation
CAUTION
Indicates a potentially hazardous situation which, if mishandled, could
result in moderate or minor personal injury, and/or property damage.
When the Installing the Unit
Avoid touching the speaker's sharp metal edge
to prevent injury.
To avoid electric shocks, be sure to switch off
the amplifier's power when connecting speakers.
When the Unit is in Use
Do not operate the speaker for an extended
period of time with the sound distorting. Doing
so may cause the speaker to heat, resulting in a
fire.
Do not stand or sit on, nor hang down from the
speaker as this may cause it to fall down or drop,
resulting in personal injury and/or property
damage.
Have the speaker checked periodically by the
shop from where it was purchased. Failure to do
so may result in corrosion or damage to the
speaker or the mounts that could cause it to fall,
possibly causing personal injury.
3. IMPEDANCE CHANGE
Input impedance is factory pre-set
to 330Ω (CS
-530BS-
EB), 170Ω (CS
-660BS-EB).
To change the impedance, change the terminal position located inside the terminal cover.
[Note]
These speakers are designed to be used for high impedance application. Never connect the speaker to
low impedance line.
■
CS-530BS-EB
Power Rating
Imp.
3.75W
2.7k
Ω
7.5W
1.3k
Ω
15W
670
Ω
30W
330
Ω
■
CS-660BS-EB
Power Rating
Imp.
7.5W
1.3k
Ω
15W
67
0Ω
30W
330Ω
60W
17
0Ω
