Name of function
Description of function
Operation
Single Digit Dialing
This function allows for Single Digit Dialing
to any pre-programmed station number, per-
sonal number, paging area 1 zone, any 2-, 3-
or 4-digit number.
Only one single digit dialing number may be
programmed at any one station. In the event
another number is programmed under this
function, the previously programmed number
is automatically cancelled. Paging is an optio-
nal function. Therefore, Single Digit Dialing
for paging purposes is only available if the
paging option has been included in the
system.
Single digit dialing may be made a function of
any master station in the following manner:
On the station which will be the calling station,
touch dial
plus
Station number
Personal number
any 2-digit number
any 3-digit number
any 4-digit number
or
touch dial
plus
or
plus
paging zone number
The station, personal number, zone, any
2-, 3- or 4-digit number can then be called
by simply touch dialing
Note:
At the station where the function is not used
program the station number by touch dial
(Own station number)
Master/Substations
With respect to this function, the stations in
the system are divided into two categories;
master stations and substations. Any master
station can be connected to any other station
in the system. However, substations can initi-
ate calls only to specific master stations. This
is done by single touch dialing, and will only
connect the substation to one specific master.
Master/Substation associations are set up by
using station #200 as the programming sta-
tion. Once these relationships have been es-
tablished, substations can then contact their
designated master stations by simply touch
dialing
Note 1:
Several substations can be programmed under
this station to connect with a signal specified
master station.
Note 2:
Programming a master station for Single Digit
Dialing of a substation number under this
function is programmed in the same manner
as other single digit dialing, and results in one
touch dialing from master to substation.
To register single digit dialing as in Note 2,
touch dial
plus
plus the station number
of the substation. Single digit dialing from
that master to a specific substation is then
accomplished by touch dialing
— 4 —
