133-22-007-2A
Mode Setting switch
(Factory-preset setting)
ON
OFF
1 2 3 4
ON
1. ALC/ AES switch
2. ATW/ AWB switch
3. Backlight Compensation (BLC) switch
4. Shutter Speed switch
1 2 3 4
ON
1 2 3 4
ON
ALC:
Do not set to this position.
AES:
Always set to this position.
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
8. ABOUT THE MODE SETTING SWITCH
Set the Mode Setting switch for the best possible picture reproduction depending on installation conditions.
ALC/ AES switch
ATW/ AWB switch
Set the white balance operation.
ATW:
Set to this position during normal use. The camera's
white balance automatically changes as an object's
color temperature varies.
AWB:
Use this switch when the difference between the
displayed color and actual color is annoying. Shoot the
white object, then turn the switch ON. The camera
operates on the initially-set white balance even if an
object's color temperature changes.
Standard position:
Set to this position during normal use. Backlight
Compensation function does not operate when the
switch is set to this position.
Backlight Compensation position (when backlit):
This position compensates images from being
displayed in black when the image is backlit.
Backlight Compensation (BLC) switch
Set this switch so that the subject is not displayed in black when
backlit.
Shutter Speed switch
OFF:
Always set to this position.
ON:
Do not set to this position.
9. SPECIFICATIONS
12 V DC ±10%
1.2 W (100 mA)
1/4 Type IT-CCD
768 (H) x 494 (V) (380,000 pixels)
2:1 interlace
Horizontal: 15.734 kHz, Vertical: 59.94 Hz
VBS1.0 V(p-p), 75
Ω
, RCA pin jack
VBS1.0 V(p-p), 75
Ω
, BNC-R jack
Internal synchronization
Horizontal: 480 lines (at center)
Vertical:
350 lines (at center)
50 dB
15 lx (50 IRE), 4 lx (20 IRE)
ATW/ AWB
f=3.0 mm
Power Source
Power Consumption
Image Device
Number of Effective
Pixels
Scanning System
Scanning Frequency
Monitor output
Video Output
Synchronizing System
Resolution
S/ N Ratio
Minimum Illumination
White Balance Mode
Focal length
Note
The design and specifications are subject to change without notice for
improvement.
1:2.0
Automatic electronic shutter iris
1:2000 (F2.0 - 89)
Horizontal: 73.9°, Vertical: 54.0°
Backlight compensation, Iris control
-10°C to + 50°C
Under 90% RH (no condensation)
Indoor use
Case: ABS resin, cool gray
Dome cover: Acrylic resin, smoked
ø107 x 78.7 (h) mm
150 g
Maximum Aperture
Ratio
Iris
Automatic Electronic
Shutter Range
Angle of view
Other Functions
Operating Temperature
Operating Humidity
Applications
Finish
Dimensions
Weight
• Accessory
Dome cover fixing screw (2.6 x 8) .................... 1
Do not change the factory-preset positions of AES/ ALC switch
and Shutter Speed switch. Changing the switch may affect the
sensitivity.
Note
