Page | 5
PRESET 3 COMPLETE: Programming Layout
After completion of the PRESET 3, click on the MEMORY button above the signal path layout,
click on
MEMORY 4,
then click on the
CHANGE
button.
CHANGE PRESET DISPLAY; Change Preset 4
To program for INPUT 4 on/ INPUTS 1 & 3 off, repeat steps 1-4, the difference is in step 2,
enable INPUT 1 & 3 as the targets. In step 3, click on
PARAMETERS
/ INPUT 1 to adjust
REDUCTION
,
HOLD TIME and FADE IN TIME
parameters. Then click on
PARAMETERS
/ INPUT 3
to adjust
REDUCTION
,
HOLD TIME and FADE IN TIME
parameters. When completed, close the
prompt. Save to the preset 4 to complete the edit.
