Setting
→
Controllers and Sensors
→
Disconnect Controllers
)
5.
In the connected state, you can press and hold the R, L, ZR, and ZL buttons at the same time for 3 seconds to
adjust the vibration intensity. Each time you press and hold 4 buttons together, the intensity is increased by a level.
There are three levels in total, divided into strong / medium / weak, (note that after the product sleeps or shuts
down, the previously set vibration intensity will be cleared, need to be reset)
Wired connection mode
1.Please ensure 'Pro Gamepad wired connection' are in the open position in the system settings of N-switch
console before using wired connections;
2.Gamepad connect with Switch Dock via USB data cable, can be used as a wired gamepad,the corresponding LED
of the gamepad slow blink;
3.Unplug the USB cable,gamepad enter wireless mode,will auto re-connect with the console.
TURBO Function
1.
Action buttons include (A/B/X/Y/L/ZL/R/ZR), all the 8 buttons can be set manually with TURBO function ;
2.
Setting method: Press and hold down one of the action button,and then press the TURBO button to enable the
TUBRO function; hold down the action button,then press TUBRO button to cancel the TURBO function ;
3.
TURBO speed setting: press and hold '
↑
' button of the D-pad,then press and hold the TURBO button to switch the
TURBO acceleration. There are three levels, 4/8/16 times per second, press the '
↓
' button of the D-pad and
Summary of Contents for TNE-603040
Page 2: ...Basic Operation ...