1.
Without connected to the N-SWITCH console
a. Level the controller, first press the '-' and 'A' button, while holding down the 'HOME' button, LED1&LED2 and
LED3&LED4 flash alternately up and down, then press the '+' button, the LED light flashes and then goes out, the
calibration is successful. The controller cannot be moved while correcting.
2.
Connecting the N-SWITCH console
a. Correct controller stick: When the controller is successfully connected to the Switch console,in
‘
Settings
’→
‘
Controller and Sensors
’→‘
Correct Gyro Sensors
’‘
Correction stick
’
, go to the calibration mode of the stick, and
then follow the prompting steps to calibrate the stick;
b. Correct controller gyro sensor: When the controller is successfully connected to the Switch console, go to the
controller gyro calibration mode in 'Settings'
→
'Controller and Sensors'
→
'Correct Gyro Sensors'
→
'Calibration’ ,
Level the controller, long press '-' or '+'button,after the calibration is successful, the controller gyroscope calibration is
completed (occasionally, the uncorrected success is prompted, after disconnecting the controller from the host,
re-connect and then step by step to correct)
Product Specifications:
Input voltage / current: DC5V/500mA
；
Normal operating voltage / current: DC3.7V/20mA
；
Max working current:
≤
300mA
；
Summary of Contents for TNE-603040
Page 2: ...Basic Operation ...
