GARAGE DOOR OPENERS USER MANUAL
3
Operation buttons: Remote Function key (RF),
Setting key (Set), UP key (Up), DOWN key (Down).
Connection terminal of Optional accessories
Radio receiver board
Fuse
Wifi Box (Refer to Wi-Fi Box User Manual)
The power indicator is on the bottom right of the display. When the power
is connected, the LED dot indicator is alight.
When entering to the power-saving mode, the LED power indicator is
flashing ( light for 0.5 second and then no light for 5 seconds )
2). The indication of control panel
3). The LED indication
1
1
2
2
3
4
5
Fuse
Receiver
1
EXT- EXT+
LIT-
LIT+
PB
GND
PH
+24V
GND +BATT
EXT- EXT+
LIT-
LIT+
PB
GND
PH
+24V
GND +BATT
4
2
3
5
2. PRODUCT DESCRIPTION
2.1 APPLICATIONS
Cobble garage door opener is applied for residential automation of up and over doors and sectional doors and has to be
operated with electricity and it’s forbidden to be operated by back-up batteries for normal use.Back-up batteries are only
allowed for emergent operation when there is a power failure, and the carriage can be released by pulling the cord to
move the door manually.
1
1
2
2
2
3
3
4
4
5
5
6
6
Cobble Garage Door Opener
Photocells (Optional accessories)
External Flashing Light (Optional accessories)
Key selector switch (Optional accessories)
Push Button (Optional accessories)
Transmitter
2.2 DESCRIPTION OF THE AUTOMATION
1). The following diagram of typical installation describes some terms and accessories of the door automation
system:
Please set stopper in the open limit position of the rack and after the setup is completed, then garage door
opener can start the system learning process.
