TMT Automation AMOS Series, User Manual

Page: 8 / 20

GARAGE DOOR OPENERS USER MANUAL
7
3.5 Connect release section to the garage door
ENGAGED
Secure handle with overhand knot
and heat seal rope.
Connect the (7) Release rope on the (8) Outer trolley
assy
RELEASED
Overhand
Knot
Rope
7 Emergency
Release Handle
1
NOTE: Handle should hang 6 feet (1.5 m) above floor.
Ensure that the rope and handle clear the tops of all
vehicles to avoid entanglement.
To prevent possible SERIOUS INJURY or DEATH from a falling
garage door:
• If possible, use emergency release handle to disengage trolley ONLY
when garage door is CLOSED. W eak or broken springs or
unbalanced door could result in an open door falling rapidly and/or
unexpectedly.
• NEVER use emergency release handle unless garage doorway is
clear of persons and obstructions.
• NEVER use handle to pull door open or closed. If rope knot
becomes untied, you could fall.
WARNING
Pull the (7) Release rope to disengage the
(6)(8) trolley
Fasten the (12) Door bracket and (16) Door bracket locator
on the center of the garage door. Connect (14) Curved arm
to (12) Door bracket.
Connect (15) Straight door arm to Release trolley
Connect (14) Curved door arm and
a (15) straight door arm with bolts and nuts.
3
Pull Down
to Release
Trolley
4 5
CONNECT DOOR ARM TO TROLLEY
2
(15)
Straight
Arm
(23)
Clevis Pin
(19)
(19)
Locking plate
Locking plate
Door bracket locator
is used when door
panel is required
(23)
Clevis pin
(24) Nut
(21) Hex Bolt
(14)
(15)
Curved
Door Arm
Straight
Door Arm