TMS Lite
LC-18-SQ-4CH-A1 LIGHTING CONTROLLER UNIT
26
Example
1) Set Mode to constant mode
Tx > @01SM{0}
Rx < @01SM{0}
(Success)
2) Set Mode to strobe mode
Tx > @01SM{1}
Rx < @01SM{1}
(Success)
3) Set CH1 Multiplier = 5
Tx > @01SR{105}
Rx < @01SR{105}
(Success)
4) Set CH2 Intensity = 90
Tx > @02SI{090}
Rx < @02SI{090}
(Success)
5) Set CH3 Strobe Width = 500 (50.0ms)
Tx > @03SW{0500}
Rx < @03SW{0500}
(Success)
6) Set Output Delay = 150 (15.0ms)
Tx > @01SD{0150}
Rx < @01SD{0150}
(Success)
7) Set Output Width = 300 (30.0ms)
Tx > @01SH{0300}
Rx < @01SH{0300}
(Success)
8) Strobe
Tx > @01ST{}
Rx < @01ST{}
(Success)
9) Set No of Frame = 10
Tx > @01SN{10}
Rx < @01SN{10}
(Success)
10) Set Frame Width = 2500 (250.0ms)
Tx > @01SE{2500}
Rx < @01SE{2500}
(Success)
11) Save EEPROM parameter
Tx > @01EE{}
Rx < @01EE{}
(Success)