MPEG-4 wired/wireless IP Camera
wireless router or AP using.
Figure 3-8: WiFi security enabled page
You can also click the “WiFi test” button to check if the IP Camera can connect to
the wireless network for these settings. You will need to unplug the Ethernet cable to
enable the wireless connection after the “WiFi test” is successful.
You can click the “WiFi scan” button to scan for all the available access points
nearby.
If you want to define fixed IP address when using WiFi connection, please press
the “IP address” button and key in your preferred IP address.
After the setting and “Save&Apply”, do not need to restart the IP Camera to let the
WiFi work, only need to unplug the Ethernet cable.
The default setting is “Disable WiFi Function”.
21
www.tmiro.com
| The mobile video gateway