MPEG-4 wired/wireless IP Camera
After the IP Camera is installed and you can see the video from the TView
software in the local network, it’s very easy to see the video in a remote location. All
you need to do is add a camera item in the “CameraList” folder of the Tview
software, key in the IP CAM ID and Password(from the ID/Password card). And then
double click this camera item. You will then see the Camera video immediately. No
further NAT/router setting modifications are needed.
Figure 2-7: Running window of Tview program
Figure 2-8: Pop-up play-video password window
12
www.tmiro.com
| The mobile video gateway